Before I install the windshield there are a couple of things I need to do while I still have easy access to the inside of the plane. The first is to update my fuse block labels. I will only have problems accessing the fuse block on the electrical panel but I went ahead and correct the instrument pod fuse block label at his time.
The next thing I need to do is route the parachute bridle. This needs to be routed between the windshield and any metal structure of the plane, most importantly, the leading edge mounting points of the wing. I also routed the smaller bridles that connect to the lower portion of the plane. I will need to carefully secure the bridles so they don't interfere with any of the control mechanisms.
